Română      English

  Главная    Карта сайта   Контакты

 




 

 

 

 

 


First page  »  Complete Lines  »  Pasta Filata  »  Moulding Machine
Moulding Machine
Moulding machine for stick Mod. STICK100

For the production of cheese with small weight and small shape. The concept of design able to define according to the customer requirements different shape (rectangular, cylindrical like a cigar, etc).

This drum, through its specific cone head configuration (attachment to the feeding hopper of the moulding machine)  allow to transform a standard moulding machine in a extruder moulding machine.

This cone head section is assembled to an extrusion channel completely heated. This channel is double walls version. Inside double walls, circulate hot water to maintain the temperature as customer define. The temperature must be defined on panel of control. The temperature remains constant through electrical resistances which heat the water up to temperature setting.

On the extrusion section length is assembled the moulding section. This moulding section is composed by special parts made of alimentary polyethylene.

The first section (on the bottom) is a slide, who must cut the cheese in right way and in the same time push the filling-moulding drum in unloading position. This movement is assured by an independent pneumatic system complete of position sensor, to define the right movement area (unloading position and bring back drum in filling-moulding section after ready cheese unloading).

On this moulding section will be realized holes with diameter and length according to the customer requirement.

The filling section is complete of a particular system for weight bearing, to be sure that all the pieces have the same weight.

Inside any hole, are assembled pushers made of stainless steel. Each hole is independent, thanks a full space between each one.

In any time the weight regulation can be done always, during feeding operation too.

When drum is in unloading position, pneumatic systems shove down all the pushers, in order to eject all cheeses from the holes, to the bath line. After the cheese release operation, moulds are filled again.

Specifications

The machine is made up of:

  • A  machine body with heated double hollow space working basin, where there are two moulding sections each one with two augers
  • Moulding area with independent heating of the wall and with fresh water circulation around cheese pieces
  • Electric plant, including the controls for the motorization (inverter) of the augers and for drum. For any processing point, for temperature control and set (in augers section and extruder-moulding area)
  • Control Panel complete with PLC Siemens and touch screen
Production capacity 4000 pieces/h (pieces 25 gr. each)

 



Other Moulding Machine

Moulding from 2 to 1000 gr for mozzarella, cherry size, braids or more dry product like caciocavallo, baby cheese, provolone and for all spherical cheese. Suitable for pizza cheese-pizza mozzarella shape, by a semiautomatic carousel up to 1000 gr. Read more...
For continuous moulding of mozzarella-type soft spun, or partially dry such as provola, scamorza, pizza cheese, braids, cherry-syze, etc. Completely heated hot water circulation in double walls of the machine body. Read more...
For continuous moulding of mozzarella-type soft spun, or partially dry such as provola, scamorza, pizza cheese, braids, cherry-syze, etc. Completely heated hot water circulation in double walls of the machine body. Read more...

 

 


 


E-mail:spinu@spinu-grup.md; tel: +373 681 353 81

© 2024 Spinu-Grup
All rights reserved
Developed by Andrei Madan
PAGE UP

Total vizitatori unici: 13105   Total ieri: 96   Total azi: 69