Română      English

  Главная    Карта сайта   Контакты

 




 

 

 

 

 


First page  »  Complete Lines  »  Pasta Filata  »  Compact Machine
Compact Machine
Compact Machine Mod. UNICA 300

UNICA 300, like all COMPACT machine was born to summarize the 4 most important phases of the paste filate working process, like:

  • Cut the raw material
  • Stretching of the curd
  • Production of the hot water necessary to stretching 
  • Final moulding of the product    

Can be achieved thanks to its versatility, a variety of spherical products (mozzarella, scamorze, provole, that with or without heads, ovoline, etc), with variable weight. The machine, in addition, allows to the user, through the application of a particular insert, which will be installed to replace the moulding drum, to get braids with different diameter and length, which are to be set by the user. The pasta filata introduced into the hopper is pushed to the inlet through the action of the auger variable speed and then finds itself in the final section of the moulding where is housed a moulding drum that turns continuously, consists of holes with different diameter and shape, depending on the production requirements.

 One the most important characteristics of this machine, is that you can mount an alternative a mould for silani, therefore using it only and exclusively for parallelepiped products. This mould (optional), is made entirely in stainless steel mounted on wheels for easy moving, and is extremely easy to position and secure it to the moulding body of the entire compact machine.  

     Specifications

The most important part of the machine can be briefly described and divided into:

CURD-CUTTER

Is made in stainless steel mounted on the machine at a comfortable high to put in the curd blocks to work, inside is located a disk with blades made in stainless steel that will proceed to cut of the curd, that will fall to the augers compartment.

AUGERS COMPARTMENT

Made in stainless steel at double room, where the augers of pre-stretching and the advancement of the product are housed, to the final paste compartment. During the pass into the cooking compartment, the curd is to be hit by a jet of hot water coming out of faucets, allowing its soaking.

HOT WATER HEATER

The hot water necessary to stretching is produced through the hot water heater incorporated into the machine, made entirely in stainless steel with operation of steam. The temperature of hot water is easily adjustable with the thermo-regulator installed on the control panel.  The water supply to the mixing zone is done by electro pump installed on the machine.

DIPPING ARMS COMPARTMENT

Have a containment capacity of about 30 kg where stay the dipping arms through which you can give to the paste the desired consistency. In this section is even possible to correct the humidity degree, if it is necessary, through the immission on the paste, of the stretching water, with adjustable flow. The paste, arrived at the right stage of stretching, escapes from the machines, through a discharge outlet to arrive to the moulding compartment.

MOULDING COMPARTMENT

With double heated room, that forming a single body with the stretching section.

ELECTRIC PANEL

Mounted on the structure of the compact machine, made in stainless steel watertight IP565, with low voltage controls.

SANITATION AND MATERIAL

The machine is manufactured by responding to the latest international sanitary regulations, both in materials and construction, so that every part is easily accessible to allow the user easy and quick cleaning.

The materials used in the construction are only in stainless steel AISI 304, with Teflon coverage for those parts that are in contact with the material processing (cutting-cooking-stretching).

The machine is made according to EEC regulations in force.    

       

Production capacity Max 350 kg/h

                                                                                                                                            



Other Compact Machine

UNICA 600, like all COMPACT machine was born to summarize the 4 most important phases of the paste filate working process, like: Read more...
Like all our machines, the UNICA is made within the guidelines of the DIR CEE 83/392, 92/46, 91/368, DPR 54/97 and conforms to the strict American standards set up by the USDA. This means: Read more...

 

 


 


E-mail:spinu@spinu-grup.md; tel: +373 681 353 81

© 2022 Spinu-Grup
All rights reserved
Developed by Andrei Madan
PAGE UP

Total vizitatori unici: 13041   Total ieri: 55   Total azi: 5